2.15 [8] ARS
Maintenance Console Location
2.15.2 [8-2] Leading Number
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Routing Plan Number
Specifies the Routing Plan Table number used for each leading number.
Default
1
Value Range
For KX-TDA50/KX-TDA100/KX-TDA200:
1–16
For KX-TDA600:
1–48
Maintenance Console Location
2.15.2 [8-2] Leading Number
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
2.15.3 [8-3] Routing Plan Time
The start and end times of a maximum of 4 different time blocks are shown for each day of the week.
There are 16 (with the KX-TDA50/KX-TDA100/KX-TDA200) or 48 (with the KX-TDA600) Routing
Plan Tables, and each Routing Plan Table can have its own time blocks. Select the desired Routing
Plan Table number from the Routing Plan list.
•
To adjust the currently displayed Routing Plan, click and drag the divisions between two time
periods.
•
To program the time blocks of the currently displayed Routing Plan, including adding or
deleting time blocks, click Time Setting.
2.15.4 [8-3] Routing Plan Time—Time Setting
The start times of a maximum of 4 different time blocks can be programmed for each day of the week,
for the selected Routing Plan. Each time block automatically ends when the subsequent block begins.
618
PC Programming Manual