8-3] Routing Plan Time; 8-3] Routing Plan Time-Time Setting - Panasonic KX-TDA50 Programming Manual

Maintenance Console Location
2.14.2 [8-2] Leading Number
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Routing Plan Number
Specifies the Routing Plan Table number used for each leading number.
Default
1
Value Range
For KX-TDA50/KX-TDA100/KX-TDA200:
1–16
For KX-TDA600:
1–48
Maintenance Console Location
2.14.2 [8-2] Leading Number
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)

2.14.3 [8-3] Routing Plan Time

The start and end times of a maximum of 4 different time blocks are shown for each day of the week.
There are 16 (with the KX-TDA50/KX-TDA100/KX-TDA200) or 48 (with the KX-TDA600) Routing
Plan Tables, and each Routing Plan Table can have its own time blocks. Select the desired Routing
Plan Table number from the Routing Plan list.
• To adjust the currently displayed Routing Plan, click and drag the divisions between two time
periods.
• To program the time blocks of the currently displayed Routing Plan, including adding or
deleting time blocks, click Time Setting.
2.14.4 [8-3] Routing Plan Time—Time Setting
The start times of a maximum of 4 different time blocks can be programmed for each day of the week,
for the selected Routing Plan. Each time block automatically ends when the subsequent block begins.
2.14 [8] ARS
PC Programming Manual 579