2.7 [1] Configuration
Feature Manual References
None
Receiving Caller ID from TIE/DID
Specifies whether Caller ID information is received when the channel type is TIE or DID.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Send Ringback Tone to Outside Caller (for DID or TIE channel)
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the
tone.
Default
Disable
176
PC Programming Manual