Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
Generate DID Number (From)
Specifies the DID number of the first location to be programmed. DID numbers for subsequent
locations will be generated automatically, by adding one to the value of the previous location.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9)
Maintenance Console Location
2.16.4 [10-3] DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
Number of Registration
Specifies the number of locations to be programmed.
Default
100
Value Range
1–1000
Maintenance Console Location
2.16.4 [10-3] DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
2.16 [10] CO & Incoming Call
PC Programming Manual
613