Panasonic KX-TDA50 Programming Manual page 629

Communication—Word Length
Specifies the number of bits in each byte of a character.
When connecting the KX-TDA Maintenance Console to the PBX using an RS-232C cable, assign the
following values to the Serial Interface (RS-232C) port of the PBX:
Word Length: 8 bit, Parity Bit: None, Stop Bit: 1 bit
CAUTION
Do not use the following combinations:
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
• Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
8 bit
Value Range
7 bit, 8 bit
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Communication—Flow
Enables the hardware flow control.
Default
None
Value Range
None, Hardware
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Manual References
None
2.17 [11] Maintenance
PC Programming Manual 629