Panasonic KX-TDA50 Programming Manual page 44

2.4 Tool
The Profile Setup window (2.4.11 Tool—Profile Setup) will be displayed.
2.
Click New or Edit.
The Profile Editor window will be displayed.
3.
Enter a name for this profile.
4.
Enter the system password used to connect to the PBX.
5.
Select the default connection method.
6.
Enter the detailed connection method settings as required. See the tables below for more
information.
Note that it is possible to select connection methods other than the default method when using
this profile to connect to the PBX. For this reason, you can choose to input settings for multiple
connection methods in a single profile. Click the tabs to view the settings for each type of
connection.
7.
Click Save.
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate
Modem Initialize
44 PC Programming Manual
Values
COMx
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Values
1-9, 0, *, # and ","
[comma]
Auto(Tone),
Auto(Pulse), Manual
–
COMx
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
–
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
Description
Enter the telephone number to be dialed to
access the PBX.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and click
Initialize to send the command to the modem.
For more details, refer to your modem's
instruction manual.