Panasonic KX-TDA50 Programming Manual page 315

To enable this setting, DSS Key—DSS Key mode for Incoming Call on this screen must be set to
ON or Flash.
Default
Disable
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.3.6 Call Pickup
DSS Key—Automatic Transfer for Extension Call
Specifies whether pressing a DSS button during an extension-to-extension call disconnects the
current call or places the call on consultation hold.
Default
Disable
Value Range
Disable: The PBX disconnects the current call, and calls the extension assigned to the DSS button.
Enable: The PBX places the current call on consultation hold.
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
1.3.8 Call Transfer
Transfer—Transfer to Busy Extension without BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Default
Disable
2.8 [2] System
PC Programming Manual 315