Tool-Export; Tool-Programmer Code Change - Panasonic KX-TDA50 Programming Manual

2.4 Tool
4.
Click Open to open the file.
A list of field names found in the imported file will be displayed.
5.
For the Feature - Speed Dial and Caller ID table, when an EMEC (KX-TDA600) or MEC (KX-
TDA50/KX-TDA100/KX-TDA200) card is installed, select the Speed Dial table to which to import
the data (KX-TDA50: Basic Memory or Expanded Memory; KX-TDA100/KX-TDA200/KX-
TDA600: system or tenant) from the drop-down list.
6.
Click the name to select a field that you want to import.
7.
Click Import to.
8.
From the drop-down list, select the field in the destination table to receive this data.
Use the tables above for reference.
9.
Click OK to link the fields.
If data in a field being imported does not match the required format for the import destination, an
error message will be displayed when the import operation is attempted, and the operation will
be canceled.
This can occur when, for example, the destination field can only accept numeric data, but the
data being imported contains alphabet characters, as the correct fields were not linked together.
10.
Repeat steps 6 to 9 for other fields as required.
11.
Click OK to perform the import operation.
2.4.5 Tool—Export
Allows several types of system data files or tables to be exported as comma-separated value (CSV)
files. These files can be used with the Import tool (see 2.4.4 Tool—Import) to update another PBX.
Except for Speed Dial and Caller ID, this option is only available at Installer level.
Note
The separator used in CSV files created using the Export tool is decided by the unit specified in
List Separator, in the Windows Regional Options Control Panel.
To export system data
1.
From the Tool menu, point to Export, and then click the type of data to export.
2.
Navigate to the folder in which you want to save the file.
3.
Enter a file name.
4.
Click Save to display the Export window.
5.
For the Feature - Speed Dial and Caller ID table, when an EMEC (KX-TDA600) or MEC (KX-
TDA50/KX-TDA100/KX-TDA200) card is installed, select the Speed Dial table from which to
export the data (KX-TDA50: Basic Memory or Expanded Memory; KX-TDA100/KX-TDA200/KX-
TDA600: system or tenant) from the drop-down list.
A list of field names that can be exported will be displayed.
6.
Click the check box beside the name of each field that you want to export.
7.
Click OK.
2.4.6 Tool—Programmer Code Change
Allows you to change the code used to log on to the Maintenance Console at startup.
40 PC Programming Manual