Motorola APX 5000 Service Manual page 254

Sec 2: 8-16
Control Top Assembly Flex
Figure 8-20. Remove Flex Connectors and Expansion Board Assembly
5. Remove the Expansion Board Assembly (H) by gently lifting up the right side of the PCB as
shown in
6. If the VOCON Board Assembly (D) is to be removed from the radio, then unplug the Control
Top Assembly flex as shown in
7. If the RF Board Assembly (C) is to be removed, use the Black Stick to unplug the antenna
coax cable from the RF Board Assembly as shown in
8. Flip the radio over.
Flex Connectors
Figure 8-20.
Figure 8-21. Remove Antenna Coax Cable Connector
Disassembly/Reassembly Procedures: Radio Disassembly
Expansion Board Assembly (33)
Figure 8-20.
Antenna Coax Cable Connector
Figure 8-21.