Motorola APX 5000 Service Manual page 65

Performance Checks: Display Radio Test Mode (Top-Display Version)
Name of Display
KG6 algorithms name
(Encryption Type 6)
Model number
Serial number
ESN
ROM Size
FLASHcode
RF band 1
Tuning Ver
Proc Ver
Option Board
Type
Option Board
Serial Number
Option Board
Bluetooth Addr
Option Board
SW Version
Exp Board Type
NOTE: All displays are temporary and will expire without any user intervention. If
Table 5-5. Test-Mode Displays (Continued)
Type of encryption being used
The radio's model number, as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
The radio's unique electronic serial
number
The memory capacity of the host FLASH
part
The FLASH codes as programmed in the
codeplug
The radio's operating frequency
Version of Tuning codeplug
Version of Processor
Type of Option board being used
Serial number of the Option board is
displayed
Bluetooth Address of the Option board is
displayed
Software version of the Option Board is
displayed
Type of Expansion Board is displayed
information is longer than the physical length of the radio's display, the information
will wrap around to the next display. After the last display, "RF TEST" is displayed.
Press the Top Side Button (Purple button) to advance the test environments from
"RF TEST", "CH TEST", "CID TEST" then press the Top Button (Orange button) to
confirm selection. Press any other buttons to advance the test.
Once a test is carried out, restart the radio to proceed to another test.
Description Appears
When the radio is secure
equipped and 6 or more
algorithms are loaded
Always
Always
Always
Always
Always
Always
Always
Always
When the radio has an Option
Board/ Maze with Apps
Expansion Board
When the radio has an Option
Board/ Maze with Apps
Expansion Board
When the radio has an Option
Board/Maze with Apps
Expansion Board
When the radio has an Option
Board/ Maze with Apps
Expansion Board
When the radio has an
Expansion Board
Sec 1: 5-9