Functions 2; Limiting The Set Temperature Operating Range - Mitsubishi Electric AG-150A Instruction Book

6 Functions 2

6-1 Limiting the Set Temperature Operating Range

Click on [Function2]-[Set Temperature Range Limit] in the menu to open the set temperature range limit
screen, and make necessary settings to limit the set temperature operating range of the local remote
controller.
Each user operation will be limited by setting the lower limit and the upper limit of the set temperature for
cooling operation, which leads to energy saving.
Note: If PAC-YG50ECA Expansion Controllers are connected, Expansion Controller system selection buttons will appear. Select
the desired Expansion Controller (EC1, EC2, or EC3), and make the settings for each system. Make the settings with the
Expansion Controllers properly connected.
Note: The set temperature range can be limited on the following remote controllers. *1
ME remote controller (PAR-F27MEA-E)
ME remote controller (PAR-F27MEA-F)
Simple ME controller (PAC-SE51CRA-F)
MA remote controller (PAR-21MAA) *2
Simple MA controller (PAC-YT51CRB) *2
*1: The operation mode that can be set varies depending on the unit model.
*2: This function cannot be used depending on the indoor unit model.
Note: The set temperature range for all modes can be limited on the browser operation screen (for administrator), AG-150A
operation screen, and TG-2000A operation screen regardless of any settings being made. (The setting made on personal
browser operation screen is in effect on the personal screen.)
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Note: When connecting AG-150A controllers by connecting an Expansion Controller to the system, temperature range limit
settings should be made only on one of the AG-150A controllers.
Temperature range limit settings on Expansion Controllers (PAC-YG50ECA), when connected, must be
CAUTION
Group No., group name
Group numbers and group
names will be displayed.
Refresh
Read setting data from AG-150A.
(1) Click the set temperature range display to display the
setting screen. Set the temperature range for cooling,
heating and automatic mode.
Click [OK] to return the previous screen.
Note: When displayed in Fahrenheit, the temperature is
displayed in 2°F steps.
(2) Click [Save Settings] to send setting data to AG-150A.
Note: When copying settings of a group to another group, click [Copy] button. The screen will change to a selection screen
(yellow-green). Click [Paste] on a group to be copied.
Note: When setting all groups collectively, click [Batch operation] button, and input settings.
made with the Expansion Controller properly connected to ensure proper settings.
: Lower limit for cooling mode and upper limit for heating mode
: Lower and upper limit for cooling, heating and automatic mode
: Lower and upper limit for cooling, heating and automatic mode
: Lower and upper limit for cooling, heating and automatic mode
: Lower and upper limit for cooling, heating and automatic mode
Lower limit
35
Batch operations
Click to set all groups
collectively.
Expansion Controller
system selection buttons
Click to select the system to be set.
Copy
Click to copy the settings.
Paste
Click to paste the settings.
Set temperature range
display
The set temperature range is
displayed.
Save settings
Send setting data to AG-150A.
Upper limit