Ct (Current Transformer) External Dimensions (Unit: Mm); Mounting - Panasonic KT9 Instruction Manual

3.4 CT (Current transformer) external dimensions (Unit: mm)

AKT4815 (for 5A, 10A and 20A)

3.5 Mounting

Notice
As the case is made of resin, do not use excessive force while screwing in the
mounting bracket, or the case or screw type mounting bracket could be damaged.
The torque should be 0.12N•m.
Mount the controller vertically to the flat, rigid panel to ensure it adheres to the
Dust-proof/Drip-proof specification (IP66).
Mounting panel thickness: 1 to 8mm.
Insert the instrument from the front side of the panel.
Attach the mounting bracket by the holes at the top and bottom of the case and secure
in place with the screws.
(Fig. 3.4-1)
(Fig. 3.5-1)
11
AKT4816 (for 50A)