Replacing The Display Latch - Dell Inspiron 4100 Manual

Removing and Replacing Parts: Dell Inspiron 4100
1 M1.7 x 3.5-mm screws (2)
2 M2.5 x 5-mm screws (2)
3 display latch
4 bracket

Replacing the Display Latch

1. On 14.1-inch XGA panels, place the display latch on top of its screw holes, and
then place the bracket on top of the display latch, aligning the bracket and
display latch screw holes.
On 14.1-inch SXGA+ and UXGA panels, align the screw holes and place the
display latch and attached bracket in the top cover.
2. Replace the two M2.5 x 5-mm screws and the two M1.7 x 3.5-mm screws that
secure the display latch and bracket to the top cover.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (34 of 58) [2/28/2004 7:04:06 AM]