Dell Inspiron 4100 Manual page 138

Removing and Replacing Parts: Dell Inspiron 4100
1 right hinge cover
2 left hinge cover
Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm
rest; the display hinges pass through the back of the palm rest.
3. Remove the
4. Turn the computer over and remove the three M2.5 x 12-mm screws labeled
"circle P."
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (37 of 58) [2/28/2004 7:04:06 AM]
"Preparing to Work Inside the
hard drive.
display assembly
Computer" before performing the
and hinge covers.