Dell Inspiron 4100 Manual page 81

file:///F|/Service%20Manuals/Dell/Inspiron/4100/diag.htm
2. If the computer is docked (connected to a docking device), undock the
computer.
3. Ensure that the computer is connected to an electrical outlet.
4. Turn on the computer.
5. Press
appears, and before the Microsoft® Windows® logo screen appears.
6. Press
the device currently set to boot first.
7. In the system setup program Boot menu, change the boot sequence so that the
CD or DVD drive boots first. Then insert the Drivers and Utilities CD into the
drive.
8. Save the settings and exit the system setup program.
The computer restarts and runs the Dell Diagnostics.
9. When you have completed running diagnostics, remove the Drivers and Utilities
CD.
10. When the computer restarts, press
appears, and before the Microsoft Windows logo screen appears.
11. In the system setup program, press
the Boot menu.
12. Reset the boot sequence so that the device noted in
13. Press
14. Remove the CD from the drive.
When you start the diagnostics, the Dell logo screen appears, followed by a message
telling you that the diagnostics is loading. After the diagnostics loads, the
file:///F|/Service%20Manuals/Dell/Inspiron/4100/diag.htm (3 of 8) [2/28/2004 7:03:57 AM]
to enter the system setup program as soon as the Dell logo screen
to locate the page with the Boot menu, and make a note of
to exit the system setup program and restart Microsoft Windows.
as soon as the Dell logo screen
until you locate the page with
step 6 boots first.