Dell Inspiron 4100 Manual page 142

Removing and Replacing Parts: Dell Inspiron 4100
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Remove the keyboard.
3. Loosen the four captive screws that secure the microprocessor thermal cooling
assembly to the system board.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (41 of 58) [2/28/2004 7:04:06 AM]
"Preparing to Work Inside the
hard drive.
Computer" before performing the