Electrical Installation - Kenwood CK 640/1 Instructions For Use - Installation Advice

Table of Contents

Advertisement

9 - ELECTRICAL SECTION
IMPORTANT: The cooker must be
installed in accordance with the
manufacturer's instructions.
Incorrect installation, for which the
manufacturer accepts no responsi-
bility, may cause injury to persons
or animals etc.
GENERAL
– Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
– The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical
cable sections can withstand the load
specified on the plate.
– The appliance is supplied without a
power supply plug and therefore if
you are not connecting directly to the
mains, a standardized plug suitable
for the load must be fitted.
– The colours of the wires in the appli-
ance power cable may not corre-
spond with the colours marked on the
terminals of your electrical plug. The
plug should always be wired as fol-
lows:
connect the green/yellow wire to
the terminal marked with the letter
E or the earth symbol or coloured
green/yellow;
connect the blue wire to the termi-
nal marked with the letter N or
coloured black;
connect the brown wire to the ter-
minal marked with the letter L or
coloured red.
– The plug must be connected to an
earthed socket in compliance with
safety standards.
– The appliance can be connected
directly to the mains placing an
omnipolar switch with minimum
opening between the contacts of 3
mm between the appliance and the
mains.
– The power supply cable must not
touch the hot parts and must be
positioned so that it does not exceed
75°C at any point.
– Once the appliance has been
installed, the switch or socket must
always be accessible.
N.B. For connection to the mains, do
not use adapters, reducers or
branching devices as they can cause
overheating and burning.
If the installation requires alterations to
the domestic electrical system or if the
socket
and
appliance
incompatible, call an expert.
He should also check that the socket
cable section is suitable for the power
absorbed by the appliance.
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must
be interrupted.
WARNING!
This appliance must be earthed.
plug
are
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents