Table of Contents
Advertisement
6 - ELECTRICAL SECTION
ELECTRICAL CONNECTION
For your safety please read the following information
Warning: This appliance must be earthed.
– The appliance must be connected to a
220-240 volts 50 cycle AC supply by
means of a three pin socket, suitably
earthed and should be protected by a
13 amp fuse in the plug or a15 amp
fuse in the consumer unit.
– The appliance is supplied with a
rewireable 13 amp 3 pin plug fitted
with a 13amp fuse. Should the fuse
require replacement, it must be
replaced with a fuse rated at 13 amp
and approved to BS1362.
– If the mains plug is unsuitable for the
socket outlet in your home or is
removed for any other reason, then
the cut off plug should be disposed of
safely to prevent the hazard of electric
shock.
– There is a danger of electric shock if
the cut off plug is inserted into any 13
amp socket outlet.
– How to wire a 13 amp plug.
CONNECTION USING FIXED
WIRING
(fig. 6.2)
It is possible to connect the appliance
directly to the mains supply by means of
a heavy duty switch with 3 mm minimum
distance between the contacts.
A double pole switch must be provided
no further than 2 metres from the appli-
ance to the electrical supply. All supply
current and earth conductors must be
able to withstand an ambient tempera-
ture of 75°C.
24
GREEN AND YELLOW
Earth
BLUE
Neutral
E
N
Cord clamp
The appliance must be protected by a
13amp fuse.
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
FUSE
BROWN
Live
L
FUSE
13 amps
Fig. 6.1
ON
Fig. 6.2
Hide quick links:
Advertisement
Table of Contents
