Table of Contents
Advertisement
10 - ELECTRICAL INSTALLATION
IMPORTANT: The cooker must be in-
stalled in accordance with the manu-
facturer's instructions.
Incorrect installation, for which the
manufacturer accepts no responsibili-
ty, may cause damage to persons, ani-
mals and things.
GENERAL
•
Connection to the mains must be car-
ried out by a qualified technician in ac-
cordance with current regulations .
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical ca-
ble sections can withstand the load
specified on the plate.
•
The cooker can be connected directly
to the mains placing an omnipolar
switch with minimum opening between
the contacts of 3 mm between the ap-
pliance and the mains .
•
The power supply cable must not
touch any hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point .
•
Once the cooker has been installed,
the switch must always be accessible .
Before effecting any intervention on
the electrical parts of the appliance, the
connection to the network must be in-
terrupted.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system, call an expert .
He should also check that the domestic
electrical system is suitable for the power
absorbed by the appliance .
IMPORTANT: This cooker must be con-
nected to a suitable double pole control
unit adjacent to the cooker.
No diversity can be applied to this con-
trol unit.
WARNING!
This appliance must be earthed.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sibility for any inconvenience resul-
ting from the inobservance of this con-
dition.
33
Hide quick links:
Advertisement
Table of Contents
