Before Using The Oven For The First Time - Kenwood CKB200 Instructions For Use - Installation Advice

BEFORE USING FOR THE FIRST TIME
Read the instructions carefully before installing and using the appliance.
After unpacking the appliance, check that it is not damaged. In case of doubt, do
not use the appliance and contact your supplier or a qualified engineer.
Remove all the packing materials (i.e. plastic bags, polystyrene foam, etc.) and do
not leave it around within easy reach of children, as these may cause serious
injuries. The packaging materials are recyclable.
Do not attempt to modify the technical characteristics of the appliance, as it may
become dangerous to use.
The appliance should be installed and all the electrical connections made by a
qualified engineeer in compliance with local regulations in force and following the
manufacturer's instructions.
USING THE OVEN FOR THE FIRST TIME
You are advised to carry out the following operations:
Furnish the interior of the oven as described under the heading "Cleaning &
Maintenance".
Switch the empty oven ON at maximum temperature for about two hours to elimi-
nate traces of grease and smell from the components.
Let the oven cool down, switch off, then clean the inside of the oven with a cloth
soaked in water and neutral detergent and dry thoroughly.
6