Panasonic AG-CPD20P Operating Instructions Manual page 13

Control Reference Guide
Rear panel (1)
CAMERA 1 connector
Connect the separately sold Color
Camera using the cable attached to
the Camera.
CAMERA 2 (brown), 3 (red),
4 (green), 5 (orange), 6 (blue)
connectors (Pin jack)
These are composite signal inputs.
Connect commercially available
cameras.
VIDEO OUT 1 (yellow),
2 (yellow) connectors
(Pin jack)
These are composite signal outputs.
VIDEO OUT 1:
Provides output of the video applied
to the [CAMERA 1] or
[CAMERA 3] connector, or the same
signal as the output of the [VIDEO
OUT 2] connector by setting with the
menu.
(Refer to Section 2: Operation
"Setting the output video".)
VIDEO OUT 2:
Accepts connection of the cable
attached to the separately sold
Remote Control Panel.
(continued)
AUDIO OUT (white) connector
(Pin jack)
This is a line level signal output.
Accepts connection of the cable
attached to the separately sold
Remote Control Panel.
CONTROL PANEL (CP)
connector
Connect the separately sold Remote
Control Panel using the cable attached
to the Remote Control Panel.
LAN (UPLOAD, PC)
connectors
Connect the recorder to PCs using
commercially available LAN cables.
Note:
For details on how to connect a PC,
contact your supplier.
GPS ANT. connector
Insert the cable from the GPS
antenna (included in the separately
sold Cable Kit). During GPS
reception, the signals received will
regularly and automatically set the
recorder clock to GPS time.
13