Panasonic AG-CPD20P Operating Instructions Manual page 9

Before Use
About the Internal Clock
Confirming the Time
The internal clock is set at the time
of factory default. Check the time
before using, and reset the clock if
necessary. (Refer to "Date/Time" in
Section 2: Operation.)
Note:
To use GPS, connect the
GPS antenna (included in the
separately sold Cable Kit) to the
[GPS ANT.] connector on the rear
panel.
Consult your supplier and request
connection.
During GPS reception, the
signals received will regularly and
automatically set the recorder
clock to GPS time.
Time Zone Setting
The factory default time zone setting
is "Eastern DST".
When using in a different time zone,
set the time zone for your region.
(Refer to "TimeZone" in Section 2:
Operation.)
(continued)
9