Panasonic AG-CPD20P Operating Instructions Manual page 25

Specifications
Video
Inputs:
CAMERA 1 x 1
1.0 V [P-P], 75 Ω, unbalanced
CAMERA 2-6 (Pin jack) x 5
1.0 V [P-P], 75 Ω, unbalanced
Outputs:
VIDEO OUT 1 - 2 (Pin jack) x 2
1.0 V [P-P], 75 Ω, unbalanced
Audio
Inputs:
AUDIO IN 1 - 4 (Pin jack) x 4
WMIC: –10 dBV, 25 kΩ,
unbalanced
MIC: –50 dBV, 3 kΩ, unbalanced
(plug-in power approx. 4 V)
(selectable)
Output:
AUDIO OUT (Pin jack) x 1
–6 dBV, 600Ω, unbalanced
DC IN connector
SIGNAL port
Input voltage L: 0 V - 1.0V
Input current:
Other I/O connectors
• GPIO connector x 1
D-Subminiature 25-pin
GPIO
Inputs: 16 ports
Input voltage L: 0 V - 1.0 V
Input current:
(Time required to
detect changes: 100 ms)
Outputs: 4 ports
Open-emitter output x 2
Output voltage: approx. 4.5 V
Output current: 15 mA (max.)
Open-collector output x 1
Input voltage: 4 V - 28 V
Input current: 25 mA (max.)
DC output x 1
Output voltage: approx. 5.0 V
Output current: 50 mA (max.)
(continued)
H: 8 V - 28 V
1 mA (max.)
H: 4 V - 28 V
12 mA (max.)
• CAMERA 1 connector x 1
16-pin, for AG-CK10P
• CONTROL PANEL connector x 1
10-pin, for AG-RCP30P
• LAN connector x 2
RJ-45, connected to a PC
application 1000 BASE-T/100
BASE-TX
• GPS ANT connector x 1
GT5 connector for GPS antenna
(included in the separately sold AG-
CR13P)
• USB connector x 2
USB A connector for USB memory
device and for USB wireless LAN
client
Compliant with USB Ver.2.0
Bus power current : 500 mA (max.)
• SERIAL connector x 1
D-Subminiature 9-pin
RS-232C
Weight and dimensions are approximate.
Specifications are subject to change
without notice.
25