Starting The Programme; Progress Of Programme; Cancelling The Programme; Loading Door Lock - Beko EV7100 User Manual

4.7 Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of
the programme will turn on.

Progress of programme

Progress of a running programme can be followed
from the Programme Follow-up indicator with the
lights "Running" and "End/Cancel".
C
INFORMATIONS
If the machine does not pass to the spinning step,
automatic unbalanced load detection system might have
been activated due to the unbalanced distribution of the
laundry in the machine.

4.8 Loading door lock

There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
If you want to open loading door when the machine
is in use, press "Start / Pause" button to pause the
machine. "Door Open" light will start flashing when
the machine is switched to Pause mode. Machine
checks the level of the water inside. If the level is
suitable, "Door Open" light illuminates steadily within
1-2 minutes and the loading door can be opened.
If the level is unsuitable, "Door Open" light turns off
and the loading door cannot be opened. If you are
obliged to open the loading door when the "Door
Open" light is off, you have to cancel the current
programme; see "Cancelling the programme".
Switching the machine to pause mode
Press the "Start / Pause" button to switch the
machine to pause mode while a programme is
running. "Running" light starts flashing on the
Programme Follow-up indicator to show that the
machine has been switched to the pause mode.
When the loading door is ready to be opened, "Door
Open" light will illuminate continuously.
Adding or taking out laundry
Press "Start / Pause" button to switch the machine to
pause mode. When the machine is switched to pause
mode, "Running" light flashes. Wait until the Loading
Door can be opened. Open the Loading Door and add
or take out the laundry.
Close the Loading Door. Press "Start / Pause" button
to start the machine.
14 / EN
C
INFORMATIONS
The door can be opened if the water level is suitable.
Door open symbol flashes until the loading door gets
ready to be opened. The symbol's light is steady when the
door is ready to open. You can open the door to add/take
out laundry.

4.9 Cancelling the programme

To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. "End/Cancel"
light will flash continuously to notify that the
programme has been cancelled.
C
INFORMATIONS
If you start a new programme after cancelling the
previous one, this new programme will start without
draining the water in the machine.
If you must certainly open the loading door when the
"Door Open" light is off, you need to use "Spin+Pump"
programme. See "Spin+Pump"
Re-spinning the laundry
Unbalanced load control system can prevent spinning
because of unbalanced load of laundry in the
machine. If you would like to spin again:
Rearrange the laundry in the machine. Select
Spin+Pump programme and press "Start / Pause"
button.

4.10 End of programme

"End/Cancel" light on the programme follow-up
indicator will light up once the programme comes
to an end; and "Door Open" symbol flashes for 1-2
minutes until the door is ready to open. When "Door
Open" symbol is steadily illuminated, the door can be
opened.
To turn off the machine, turn program selection knob
to "On / Off" position. Take out your laundry and close
the loading door. The machine will be ready for the
next run.
4.11 Door Open
"Door Open" symbol is illuminated when the door is
ready to open. It flashes until the door gets ready to
open. If the "Door Open" symbol is not illuminated,
do not force the door to open. The symbol's light is
steady when the door is ready to open.
Washing Machine / User's Manual