How To Use The Snmp Function - Hitachi Compute Blade 2000 User Manual

How to use the SNMP function

(1) Procedure for SNMP
Acquire MIB files
[1]
for SNMP Function.
Set environment
[2]
for SNMP Function
on the manager side
Set environment for
SNMP Function
[3]
device.
Set environment for
[4]
SNMP Function.
(SNM)
Execute the SNMP
notification receive
[5]
test (SNM).
Is the SNMP
manager notified
properly?
Yes.
Start using SNMP
[6]
functions.
(2) Acquiring MIB files for SNMP
Acquire MIB files from the SNMP agent by executing "Download MIB File" from the
SNMP setting menu on the system Web console of the management module.
No.
[1]
[2]
[3]
Modify the
[4]
environment
and settings.
No.
[5]
[6]
1564
Description
Acquire a MIB file that is required to
perform the SNMP function.
Register the information in the MIB
file acquired in step [1] into the
SNMP manager.
Set the environment that allows
SNMP trap function to perform.
Using the console, set the
information required for SNMP
functions, including the IP address of
the destination SNMP manager and
the name of a community for
SNMPv1/v2c; the IP address of the
destination SNMP manager, engine
ID, access type, user name, and
password for SNMPv3..
Using the test notification function,
perform a test trap notification. If the
SNMP manager fails to receive any
test trap notification or receives
notification of authentication error in
SNMPv3Trap, review steps [2], [3],
and [4] for correction.
The state is in normal operation.