Command For Obtaining An Overview Of System Operation - Hitachi Compute Blade 2000 User Manual

Command for obtaining an overview of
system operation
 Outline of the command for obtaining an overview of system
operation
The command for obtaining an overview of system operation, HvmGetPerf, obtains
statistics collected by the LPAR manager. Statistics information includes the LPAR
manager execution time, busy ratio, LPAR execution time and service ratio, which can be
referenced on the LPAR Usage screen. This command allows a remote system to obtain
the operating status of the LPAR manager system or LPAR or scripting or other program
to obtain that information.
The HvmGetPerf command can obtain the following performance statistics:
(1) Service ratio and service time for each LPAR
(2) Execution time and busy ratio for each LPAR
(3) Number of dedicated and shared processors for each LPAR
(4) Logical processor usage time for each LPAR
(5) Physical processor usage ratio
(6) Execution time and busy ratio for the LPAR manager system
The HvmGetPerf command obtains the latest values of performance statistics collected in
a second.
It supports a summary output format for higher legibility and a text format that is easy for
other programs to handle.
 Installing the HvmGetPerf command
The HvmGetPerf command is provided as an executable command on the command
prompt of Windows Server 2003, Windows server 2008, Windows XP, and Windows
VISTA. The HvmGetPerf command can be used from a management server to which
BSM1 to 4 IP Address or LP CLI1 to 8 IP Address is set on the System Configuration
screen.
The HvmGetPerf command is stored in the Compute Blade 2000 HVM Utility CD. To use
the command, copy the HvmGetPerf command to the directory where the HvmGetPerf
command execution path of the management server is set.
The command cannot be used from a management server to which BSM address or CLI
IP address is not set. Set the IP address to the management server with BSM command of
SVP command mode or System Configuration screen.
SC/BSM needs to operate on the management server to which the BSM IP Address is
set .
1351