Hitachi Compute Blade 2000 User Manual page 977

Items of the I/O module firmware are described in the table below: I/O module firmware
information.
Description of
Item
item
I/O module slot
#
number
I/O module
Behavior
mode
Revision General version
of I/O slot
expansion unit
controller
firmware
Dictionary is described in the table below: Dictionary information.
Description of
Item
item
Revision Dictionary file
version
You can update the dictionary by typing U in the FW command menu and pressing
Enter. The dictionary to be updated and then a confirmation message are displayed.
At the prompt, if you type Y and press Enter, the dictionary will be updated. To cancel
the update, type N after the confirmation message and press Enter, or just press Enter.
-- Update file information --
File name
-------------------------------- ---------------
dict.00059.update
Confirm? (Y,[N]) : Y (Enter)
--- Update I/O module firmware progress ---
I/O module0 process:Completed.
0% ------ 20% ----- 40% ----- 60% ----- 80% ---- 100%
|..................................................| [100]%
I/O module1 process:Completed.
0% ------ 20% ----- 40% ----- 60% ----- 80% ---- 100%
|..................................................| [100]%
- Update firmware was completed.
Hit enter key. (Enter)
Value
0, 1
-------
Active
Standby
-------
XXXXXXXXXXXXXXXX
Value
XXXXX
File size(byte)
280310
926
Description of value
-
Not installed; undecided mode;
BootDisable
Unit management master
Not unit management master
Not installed.
General version of I/O slot
expansion unit controller firmware:
32 characters
Description of value
Dictionary version: 5 characters