Hitachi Compute Blade 2000 User Manual page 689

-- Security strength of partition --
P Security strength
- -----------------
0 Default
1 High
2 High
3 High
4 High
5 High
6 High
7 High
WARNING : <Partition0> BMC restart automatically.
Confirm? (Y,[N]) : Y
- <PartitionX> Writing setting was completed.
Hit enter key.
You cannot set security strength to a powered-on partition or
not-completely-initialized one.
If you enter T at the SC command menu and press Enter, the current settings display
for TSL versions, TLS 1.2, TLS 1.1, TLS 1.0, and SSL 3.0. At the prompt, enter Enable
or Disable. The new setting values are displayed. A confirmation message displays,
prompting you to confirm the new settings. To add the setting, enter Y and then press
Enter. To cancel the operation, enter N and then press Enter, or simply press Enter.
TLS 1.2 : Enable
(0=Disable,1=Enable,[Unchange]) : 0
TLS 1.1 : Enable
(0=Disable,1=Enable,[Unchange]) :
TLS 1.0 : Enable
(0=Disable,1=Enable,[Unchange]) :
SSL 3.0 : Enable
(0=Disable,1=Enable,[Unchange]) :
-- TLS version of management module --
TLS 1.2 : Disable
TLS 1.1 : Enable
TLS 1.0 : Enable
SSL 3.0 : Enable
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
You cannot disable all TLS/SSL versions. When security
strength of the management module is high, you neither
enable nor disable TLS/SSL versions. Only TLS 1.2 can be
used.
638