Hitachi Compute Blade 2000 User Manual page 670

(G,H,B,R,[Q]) : B (Enter)
Input backup file name ([Q=Quit]) : key_000000 (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Creating backup file was completed.
- Backup file name is ssl-key00000.backup.
Hit enter key. (Enter)
The SSL key pairs and certificate that you have backed up will be stored in a file in the
user directory of the management module. Press Enter, and the screen returns to the
SSL private key and certificate menu. You can take out the SSL key pairs and
certificate files via FTP.
If you enter R in the SSL private key and certificate menu and press Enter, you can
restore the SSL private key pairs and certificate. The list of files of the SSL key pairs
and certificate is displayed. You are prompted to select a file for restoration. When you
specify a file number, a confirmation message appears. To start the restoration, enter
Y and press Enter. To cancel the process, enter N and press Enter, or just press Enter.
(G,H,B,R,[Q]) : R (Enter)
-- Backup file list --
<File0>
ssl-test.backup
<File1>
ssl-key_000000.backup
Select backup file (0-1,[Q=Quit]) : 0 (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Restoring backup data was completed.
Hit enter key. (Enter)
 SEC command
You can set the network service. Enter SEC at the prompt, and press Enter.
5713RF0 NNNNN(0)SVP> SEC
<< SEC - Service setting. >>
-- Service setting menu --
F. FTP setting.
T. HTTP/HTTPS setting.
S. SSH setting.
E. Telnet setting.
H. Connection allowed network setting for all of above protocols.
A. Show all service setting.
Q. Quit.
(F,T,S,E,H,A,[Q]) :
(Enter)
619