Hitachi Compute Blade 2000 User Manual page 718

# Item
1 Power
2 Status
3 Auto power on
4 Chassis powerlinkage
5 AC recovery
6 Recovery wait
7 Powered on control setting
8 N+M cold standby
9 Current Configuration
Description
The power status of the physical partition.
Set as: ON or OFF
The operating status of the physical partition.
Set as: Normal, Init. Fail, Initializing, or Error
Setting whether or not the physical partition powers on
automatically synchronized with the power on to the
server chassis:
"Synchronized" or "------" as not synchronized.
Indicates whether the operation of the power supply to
the physical partition is linked to activation of the power
supply of the server chassis.
Set as: Link or Do not link
(This item is not supported. To be synchronized with the power
operation for the chassis regardless of this setting value.)
Indicates what behavior the physical partition power
supply adopts when power is restored to the server
chassis.
Set as: Remain OFF, Turn ON, or Maintain status before
power failure
Indicates how long the system waits before performing
the action specified above.
Set as: 0 to 60
Status whether or not restriction on powering on the
partition is enabled: Power-on enabled or Power-on
restricted.
Indicates whether the N+M cold standby function is
enabled for the physical partition.
Set as: Enabled or Disabled
Preboot eXecution Environment (PXE) or Inline
depending on settings and the type of a server blade.
When no server blade is installed or the partition in
667