Hitachi Compute Blade 2000 User Manual page 958

Description of
Item
item
# I/O module slot
number
Behavior I/O module
performance
Power Power supply
status
Condition Status:
Whether or not
available for the
user operation;
FAIL status
LID Lamp Status of the
identification LED
Type P in the IOC command menu and press Enter. The Power control menu is
displayed.
(P,L,[Q]) : P (Enter)
-- I/O module status --
# Behavior Power Condition
- -------- ----- ------------- --------
0 ------ --- -----------
1 Active On Normal
-- Power control menu --
S. Shutdown.
R. Restart.
SW. Switch active/standby.
Q. Quit.
(S,R,SW,[Q]) :
Select a menu item from the following list to execute it.
Menu
S. Shutdown
R. Restart
SW. Switch active/standby
Q. Quit
Value
0 or 1 -
------- No I/O module is installed.
"Active" undecided
Boot is disabled.
Active Unit management master
Standby Not unit management master
------- No I/O module is installed.
On The I/O module is powered on.
Off The I/O module is powered off.
------- No I/O module is installed.
Normal -
Booting Booting now
Shutting down Shutting down now
Boot disable Boot is disabled.
FAIL The module fails.
------- No I/O module installed; Boot is
disabled; Boot of the other module is
disabled; In failure; the other module
in failure.
On LED lights solid.
Off LED is off.
LID lamp
------
Off
Description
Shuts down the I/O module.
Restarts the I/O module.
Switches the unit management masters of the I/O module.
Returns to the previous menu.
907
Description of value