Hitachi Compute Blade 2000 User Manual page 848

ID Level
FF28 Info On <X>, error alert (immediate replacement) is sent by the user
request operation.
Meaning: A test of the N+M cold standby function (immediate failover) was performed on the
partition indicated by X.
Action: No particular action is required as the message relates to a test.
FF29 Info On <X>, error alert is sent by the user request operation.
Meaning: A test of the N+M cold standby function (delayed failover) was performed on the
partition indicated by X.
Action: No particular action is required as the message relates to a test.
FF2A FAIL On <X>, a failure requiring an immediate failover occurred.
Meaning: A failure which is subject to immediate failover by the N+M cold standby function
occurred on the partition indicated by X. The affected partition will now fail over to its
counterpart in the standby system.
Action: Contact your sales or service representative.
FF2B FAIL On <X>, a failure requiring a failover occurred.
Meaning: A failure which is subject to delayed failover by the N+M cold standby function
occurred on the partition indicated by X. The affected partition will now fail over to its
counterpart in the standby system.
Action: Contact your sales or service representative.
FFC0 Information Management Module sent a connection request alert.
Description: The management module sent a connection request to HCSM.
Action: None.
FFC1 Information Management Module sent a connection establishment alert.
Description: Connection between the management module and HCSM has established.
Action: None.
FFC2 Information Management Module sent a keep-alive alert.
Meaning: This message is an alert for confirming connection between the management
module and HCSM.
Action: No particular action is required.
FFC3 Information On <X>, smart configure started (Data Y procedure).
[Description A smart configure process has started in the server blade shown in X. Y shows
a type of smart configuration as follows.
acquisition: Acquires information from the server blade.
setting: Sets information in the server blade.
diagnosis: Diagnoses problems in the server blade.
Action: None.
FFC4 Information On <X>, smart configure succeeded (Data Y procedure).
Description: ] Smart configuration has successfully completed in the server blade shown in X.
Y shows a type of smart configuration. (See FFC3.)
Action: None.
FFC5 Information On <X>, smart configure failed (Data Y procedure).
Description: Smart configuration has failed in the server blade shown in X. Y shows a type of
smart configuration. (See FFC3.)
Action: Another alert will be sent, describing the reason for failure. Follow the Action shown
in the alert.
FFCA Information The IP address of the management module changed.
Description: The management module IP address has been changed.
Action: None.
Message
Description and Action
797