Hitachi Compute Blade 2000 User Manual page 830

ID Level
Meaning: The temperature of the component indicated by %s2 in the module indicated
by %s1 is above a warning threshold.
Action: Although the module can continue operating, a higher warning level (1702) may be
reached at any time. Make sure that the equipment's cooling is not impaired. Impaired
cooling may be caused by inadequate air conditioning, a malfunctioning fan module, or
blocked vents in the equipment.
On module <%s1>, the temperature <%s2> rose too far above
1702 FAIL
tolerable levels.
Meaning: The temperature of the component indicated by %s2 in the module indicated
by %s1 is exceedingly high.
Action: The affected module may be shut down to protect its hardware. Contact your sales or
service representative. Also, make sure that the equipment's cooling is not impaired.
Impaired cooling may be caused by inadequate air conditioning, a malfunctioning fan
module, or blocked vents in the equipment.
1703 WARNING\ On module <%s1>, the temperature <%s2> fell below the warning
level.
Meaning: The temperature of the component indicated by %s2 in the module indicated
by %s1 is below a warning threshold.
Action: The module can continue operating, but check the temperature at the installation site.
1705 Info On module <%s1>, the temperature <%s2> has been restored to a
tolerable level.
Meaning: The temperature of the component indicated by %s2 in the module indicated
by %s1 is below a warning threshold.
Action: This message indicates recovery from a problem, and no particular action is required.
1710 WARNING On module <%s1>, the voltage <%s2> exceeded the warning level.
Meaning: The voltage at the component indicated by %s2 in the module indicated by %s1 is
above a warning threshold.
Action: Although the module can continue operating, a higher warning level (1711) may be
reached at any time. Contact your sales or service representative.
1711 FAIL On module <%s1>, the voltage <%s2> rose too far above tolerable
levels.
Meaning: The voltage at the component indicated by %s2 in the module indicated by %s1 is
exceedingly high.
Action: The affected module may be shut down to protect its hardware. Contact your sales or
service representative
1712 FAIL On module <%s1>, the voltage <%s2> became abnormal.
Meaning: An abnormal voltage value is detected at the component indicated by %s2 in the
module indicated by %s1.
Action: The affected module may be shut down to protect its hardware. Contact your sales or
service representative.
1713 WARNING On module <%s1>, the voltage <%s2> became abnormal.
Meaning: The voltage at the component indicated by %s2 in the module indicated by %s1 is
below a warning threshold.
Action: Although the module can continue operating, a higher warning level (1714) may be
reached at any time. Contact your sales or service representative.
1714 FAIL On module <%s1>, the voltage <%s2> became abnormal.
Meaning: The voltage at the component indicated by %s2 in the module indicated by %s1 is
below a warning threshold.
Action: Although the module can continue operating, a higher warning level (1714) may be
reached at any time. Contact your sales or service representative.
1715 Info On module <%s1>, the voltage <%s2> has been restored to a
Message
Description
779