Hitachi Compute Blade 2000 User Manual page 960

 FAN command
You can display the fan module status. Type FAN at the prompt, and press Enter.
5713RF0 NNNNN(0)IOEU> FAN
<< FAN - FAN module. >>
-- FAN module status --
F Power
- -------------------- --------- ---------- ----------
0 On
1 On
2 On
3 On
-- FAN module menu --
Q. Quit.
([Q]) :
Select a menu item from the following table to execute it.
Menu
Q. Quit
Items of the fan module status are described in the table below.
Description of
Item
item
F Fan module
slot number
Power Power supply
status
Condition Status:
FAIL status
Unit1 Fan 1
(rpm)
Unit2 Fan 2
(rpm)
(Enter)
Condition Unit1(rpm) Unit2(rpm)
Normal 3000
Normal 3000
Normal 3000
Normal 3000
Quits the FAN command.
Value
0 to 3 -
------- No fan module is installed.
On Power is supplied to the fan module.
Processing Power is being turned down.
power off
Off No power is supplied to the fan module.
Processing Power is being supplied to the fan module.
power on
------- No fan module is installed.
Normal -
FAIL The module fails.
------- No fan module is installed.
Integer Revolution per minute of Fan 1 (Unit: rpm)
------- No fan module is installed.
Integer Revolution per minute of Fan 2 (Unit: rpm)
909
3000
3000
3000
3000
Description
Description of value