Hitachi Compute Blade 2000 User Manual page 697

Select a menu item from the following list to execute the function.
Menu
B. Backup
R. Restore.
Q. Quit
If you enter B at the UBR command menu and press Enter, you are prompted to enter
characters used for the file name. To save the configuration, enter Y at the
confirmation prompt and press Enter. To cancel the operation, enter N at the
confirmation prompt and press Enter, or simply press Enter.
(B,R,[Q]) : B (Enter)
Input backup file name ([Q=Quit]) : conf
Confirm? (Y,[N]) : Y
- Creating backup file was completed.
- Backup file name is svp-conf.backup.
Hit enter key. (Enter)
When the file finished saving the configuration information, the file name is displayed.
Press Enter and the screen returns to the management module configuration menu.
That file is stored in the user directory in the management module. You can take out
the file via FTP or SFTP. The account name and password for connection via FTP or
SFTP are the same as when you log in to the system console.
If you enter R at the UBR command menu and press Enter, the list of files containing
the management module configuration is stored in the user directory. You are
prompted to select a file to be restored. When you enter the number to specify a file, a
warning message indicating that the management module restarts after restoring the
configuration is displayed. A confirmation message appears. To restore the
configuration, enter Y at the confirmation prompt and press Enter. To cancel the
operation, enter N at the confirmation prompt and press Enter, or simply press Enter.
(B,R,[Q]) : R (Enter)
-- Backup file list --
<File0>
svp-conf.backup
Select backup file (0,[Q=Quit]) : 0
WARNING : If confirm, this connect is lost.
Confirm? (Y,[N]) : Y
- <Management module0> Restarting
Saves management module configuration information.
Restores management module configuration information.
Returns to the previous menu.
(Enter)
(Enter)
(Enter)
(Enter)
646
Description