Hitachi Compute Blade 2000 User Manual page 611

If you enter D in the VLAN setting menu and press Enter, the current VLAN setting
appears. At the prompt, enter the VLAN ID, and the changed setting value is displayed.
A confirmation message appears. At the prompt, enter Y and press Enter, and the
VLAN setting is saved. To cancel the setting change, enter N and press Enter, or just
press Enter.
(M,C,D,[Q]) : D (Enter)
-- VLAN setting --
Partition
VLAN ID Ext port M 0 1 2 3 4 5 6 7 0 1 2 3 4 5
------- -------- - --------------- -----------
Untag0 MGMT-0 X - X X X X X X X X X X X X X
Untag1 MGMT-1 - X - - - - - - - - - - - - -
2 MGMT-0 - - - - - - - - - - - - - - -
Select VLAN ([Q=Quit]) : 2 (Enter)
-- VLAN setting --
Partition
VLAN ID Ext port M 0 1 2 3 4 5 6 7 0 1 2 3 4 5
------- -------- - --------------- -----------
Untag0 MGMT-0 X - X X X X X X X X X X X X X
Untag1 MGMT-1 - X - - - - - - - - - - - - -
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
Switch module
Switch module
560