Hitachi Compute Blade 2000 User Manual page 138

 BMC time settings
Set the time of the server blade BMC (Baseboard Management Controller).
Select Server Settings in the upper tabs and then select BMC Time in the tree
menu on the left to display the following screen.
BMC time is used for (1) time stamp of error logs, and (2) the schedule operations
linked with ServerConductor.
In addition to the BMC time setting using the server blade
web console, set the time in the EFI Menu during the
installation of the server blade.
See 'EFI Setup Screen' in
menu
(X55A1/X55A2 models)"
menu.
1
#
1 Refresh
2 Time Synchronization
Method
"Standard server blade setup
for setting the time in the EFI
Item
Reloads the information.
Do not use NTP:
The BMC time is set as follows:
(1) Basic mode (not using LPAR manager)
with SC (ServerConductor) Agent installed:
Time synchronization function of SC Agent
sets the BMC time to the OS time.
- The BMC time will be updated after OS
startup.
- Change the OS time when you want to
change the BMC time. The BMC time
settings via server blade Web console is
rewritten or ignored.
(2) Basic mode without SC Agent installed:
the BMC time is set and/or adjusted
manually via the BMC Time screen.
87
1
2
3
4
5
6
8
7
Description