Hitachi Compute Blade 2000 User Manual page 796

SNMP Agent settings
# Item
1 SNMP trap
function
2 System Contact
Name
3 System Location
4 Port number
5 Trap level
6 SNMP version
7 Engine ID string
8 Engine ID
9 SNMP trap
message
The Manager settings
# Item
1 SNMP version
2 IP address
3 Port number
4 Community Name
5 User Name
6 Access Type
7 Authentication
type
Description
Indicates whether the SNMP trap function is enabled or
disabled.
Set as: Enabled or Disabled
The contact information for the system administrator.
This field can contain a maximum of 60 alphanumeric
characters and symbols.
The location of the system.
This field can contain a maximum of 60 alphanumeric
characters and symbols.
The port number used for SNMP transmission.
Set as: 1 to 65535
The trap notification level.
You can select disable, alert, information, or all.
SNMP version used by the agent.
Value: v1/v2c or v1/v2c\v3
Enabled only when the SNMP version is v1/v2c/v3.
Character string that the agent uses to create an engine
ID: 1 to 27 character(s), 1-byte printable alphanumeric
characters and signs, can be used.
Enabled only when the SNMP version is v1/v2c/v3.
Engine ID used by the agent which is automatically
created from the engine ID string.
Indicates SNMP trap failure messages. One of the
following values.
BSM: Indicates alerts in the same way as BSM alerts.
HCSM: Indicates alerts in the same way as HCSM alerts.
Description
SNMP version used by the SNMP manager
Set as: v1/v2c or v3.
IP address of the SNMP manager. Setting for the
manager is disabled by specifying 0.0.0.0.
Destination port number for traps issued by the SNMP
manager.
Set as: 1 to 65535
Enabled only when the SNMP version is v1/v2c.
Community name of the SNMP manager
This field can contain a maximum of sixty 1-byte printable
alphanumeric characters and signs.
Enabled only when the SNMP version is v3.
User name of the SNMP manager.
1 to 32 characters, 1-byte printable alphanumeric
characters and signs, can be used.
Enabled only when the SNMP version is v3.
Access type for the SNMP manager
Set as: noAuthnoPriv, AuthnoPriv, or AuthPriv
Enabled only when the SNMP version is v3 and the
access type is AuthnoPriv/or AuthPriv.
745
Edit
Yes
Yes
Yes
Yes
Yes
Yes
-
Yes
Edit
Yes
Yes
Yes
Yes
Yes
Yes
Yes