Hitachi Compute Blade 2000 User Manual page 832

ID Level
Meaning: An error occurred in the internal HDD of the module indicated by %s1.
Action: Contact your sales or service representative.
1738 Info On module <%s1>, a 1-bit error correction occurred in the memory.
Meaning: A recoverable error occurred in the memory of the module indicated by %s1, and
the error was successfully corrected.
Action: No particular action is required.
1739 FAIL On module <%s1>, a 2-bit error occurred in the memory.
Meaning: An unrecoverable error occurred in the memory of the module indicated by %s1.
Action: Contact your sales or service representative.
173A WARNING On module <%s1>, the number of 1-bit error corrections exceeded
the limit.
Meaning: A recoverable error occurred in the memory of the module indicated by %s1.
Although the error was successfully corrected, the maximum number of recoverable errors
has been exceeded.
Action: The system can continue to operate, but may develop a fault that causes
unrecoverable errors in the future. Contact your sales or service representative.
173B WARNING On module <%s1>, part of the installed memory was disabled.
Meaning: The memory of the module indicated by %s1 was found to be partially defective,
and the module was started with the defective memory isolated.
Action: The system can continue to operate but with reduced performance. Contact your
sales or service representative.
173C WARNING On module <%s1>, the fuse (for I/O) on the motherboard has blown.
Meaning: The fuse indicated by %s2 on the board in the module indicated by %s1 has blown.
Action: Contact your sales or service representative.
173F FAIL On module <%s1>, an abnormal event occurred.
Meaning: A fault occurred in the module indicated by %s1.
Action: Contact your sales or service representative.
1740 WARNING On module <%s1>, an abnormal event occurred.
Meaning: A fault occurred in the module indicated by %s1.
Action: Contact your sales or service representative.
1741 Info On module <%s1>, the abnormal event was corrected.
Meaning: The module indicated by %s1 recovered from a fault.
Action: No particular action is required.
1742 WARNING On module <%s1>, an AC input error occurred.
Meaning: A power supply problem was detected in the module indicated by %s1.
Action: Make sure that the power supply to the equipment (at the breaker or wall socket) is
normal. If the power supply is normal, contact your sales or service representative.
1743 Info On module <%s1>, the AC input error has been corrected.
Meaning: Power has been restored to the module indicated by %s1.
Action: No particular action is required.
1744 WARNING On module <%s1>, the fan rotation speed is abnormally high or low.
Meaning: A fault has occurred in the fan module indicated by %s1.
Action: Contact your sales or service representative.
1745 Info On module <%s1>, the fan rotation speed has been restored a
normal level.
Meaning: The fan module indicated by %s1 recovered from a fault.
Action: No particular action is required.
Message
Description
781