Hitachi Compute Blade 2000 User Manual page 703

If you enter L at the LP restore menu and press Enter, you are prompted to select a
partition. When you enter the partition number and press Enter, a confirmation
message appears. To restore the configuration at the next LPAR manager boot, enter
Y at the confirmation prompt and press Enter. To cancel the operation, enter N at the
confirmation prompt and press Enter, or simply press Enter.
(B,L,[Q]) : L (Enter)
Select partition (0-7,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- <Partition0> Restoring backup data was completed.
Hit enter key. (Enter)
When restoring the configuration before LPAR migration to
the migrated partition with the restoring function of this
command, restore the configuration before migration to both
the source and destination. See Chapter 12: Logical
partitioning manager for further information.
If you enter H at the UBR command menu and press Enter, the Fibre-channel HBA
menu is displayed.
(M,B,E,F,V,H,D,[Q]) : H(Enter)
-- Fibre Channel HBA menu --
B. Backup.
F. Backup.(Hitachi 16Gb Fibre Channel Card)
Q. Quit.
(B,F, [Q]) :
Select a menu you require from the following list, and execute it.
Menu
B. Backup.
Backup.(Hitachi 16Gb
F
Fibre Channel Card)
Q. Quit
Entering B allows you to back up settings for Hitachi 4 Gb or 8 Gb fibre channel card. If
you enter B at the Fibre-channel card setting menu and press Enter, you are
prompted to select a partition. When you enter the partition number and press Enter,
you are prompted to select a server blade. When you enter the server blade slot
number and press Enter, you are prompted to select an expansion card or I/O adapter.
If you select an expansion card, you are prompted to enter the expansion card slot
number. If you select an I/O adapter, you are prompted to enter the I/O adapter slot
number. If you select an I/O adapter on an I/O slot expansion unit, you are prompted to
enter the slot number of the connection board to the I/O slot expansion unit and the I/O
adapter slot number on the I/O slot expansion unit.
(Enter)
(Enter)
Backs up settings for Hitachi 4 Gb or 8 Gb Fibre-channel
card settings.
Backs up settings for Hitachi 16 Gb Fibre-channel card
Returns to the previous menu.
652
Description