Hitachi Compute Blade 2000 User Manual page 315

Properties: Controller properties submenu 2
Click Next in the Properties: Controller properties submenu 1 screen, and the
following screen appears.
Firmware version; 2.110.63-1184
Stop CC On Error, Schedule CC, Maintain PD Fail History,
and Disk Activity are not supported. Do not set those items.
Setting item
A Stop CC On Error *1
B Schedule CC *1
Maintain PD Fail History
C
*1
D Stop On Error *2
E Controller BIOS
F Disc Activity *1
*1 Do not set this item, which is not supported.
*2 Make sure to use this item with the default setting.
Description
Sets an operation when an error is
detected at the consistency check.
Sets a consistency check schedule.
Sets whether or not a failed hard
disk can be used.
Sets whether or not to boot the OS
when an error is detected during the
consistency check.
Sets the disk array controller BIOS. [Enabled )] /
Sets hard disk LED switching.
264
Setting/display value **
[No (continuous operation)] /
Yes (stops the consistency check.)
When clicking [Supported], the
screen moves to "Schedule CC
Page: Schedule Consistency
Check setting submenu".
[Enabled (Registers failed hard
disk information.)] /
Disabled (Not register failed hard
disk information.)
[Disabled)] / Enabled
Disabled
[Disabled)] / Enabled