Hitachi Compute Blade 2000 User Manual page 617

 MLC command
You can display the network setting for maintenance. Enter MLC at the prompt, and
press Enter.
5713RF0 NNNNN(0)SVP> MLC (Enter)
<< MLC - Maintenance LAN setting. >>
-- Management module --
M IP address
- --------------- ---------------
0 192.168.254.
1 192.168.254.
-- static route --
Network address
Subnetmask
Router IP address : 0. 0. 0. 0
-- Maintenance LAN setting menu --
Q. Quit.
([Q]) :
Select a menu item from the table below to execute it.
Menu
Q. Quit
Items per management module on the screen are described in the table below.
Menu
IP address
Subnetmask
Items of the static route are described in the table below.
Menu
Network address
Subnetmask
Router IP address
Subnetmask
1 255.255.255. 0
2 255.255.255. 0
: 0. 0. 0. 0
: 0. 0. 0. 0
Quits the MLC command.
IP address of the interface for the maintenance network of
the management module.
Subnetmask of the interface for the maintenance network
of the management module.
Network address of a network targeted for static routing.
Subnetmask of a network targeted for static routing.
IP address of a router transferring to targeted network for
static routing.
566
Description
Description
Description