Hitachi Compute Blade 2000 User Manual page 760

Power setting items are described in the table below:
# Item
1 Partition
2 Power
3 Status
4 Chassis
powerlinkage
5 AC recovery
6 Recovery wait
Smart Configure setting items are described in the table below:
# Item
1 Partition
2 N+M cold standby
3 Current
Configuration
method
4 Configuration
method
5 Current WWN
type
6 WWN type
Smart Configure setting item is described in the table below:
# Item
1 Edit
Physical partition configuration items are described in the table below:
# Item
1 Partition
2 Slot number
3 Edit
Description
The physical partition number.
The power status of the physical partition.
Set as: ON or OFF
The operating status of the physical partition.
Set as: Normal, Init. Fail, Initializing, or Error
Indicates whether the operation of the power supply to
the physical partition is linked to activation of the power
supply of the server chassis.
Set as: Link or Do not link
Indicates what behavior the physical partition power
supply adopts when power is restored to the server
chassis.
Set as: Remain OFF, Turn ON, or Maintain status before
power failure.
Indicates how long the system waits before performing
the action specified above.
Set as: 0 to 60
Description
The physical partition number.
Sets Enable or Disable.
The current Configuration method depends on the Smart
Configure method settings and device configuration.
Sets a Smart Configure method: PXE or Inline
WWN type currently used
Sets a WWN type to use: Original or Additional
Description
Goes to the editing screen of the physical partition whose
check box is checked.
Description
The number of a physical partition
The slot number belongs to a physical partition. "-------" is
shown to ineffective partitions.
Goes to the wizard to change physical partition
configuration.
709
Edit
Yes
Yes
Yes
Edit
Yes
Yes
-
Yes
Edit
-
Edit
-
-
-