Hitachi Compute Blade 2000 User Manual page 662

When you save the host key, the host key of the SSH server is saved in the user
directory in the management module. The host key name is displayed. Press Enter,
and the screen returns to the SSH host key menu. You can take out the host key file
via FTP.
If you enter R in the SSH host key menu and press Enter, you can restore the host
key of the SSH server. The host key list stored in the user directory is displayed. You
are prompted to select a file to be restored. To restore the host key, enter Y and press
Enter. To cancel the restore, enter N and press Enter, or just press Enter.
(G,H,B,R,[Q]) : R (Enter)
-- Backup file list --
<File0>
pub-key_000000.backup
<File1>
pub-test.backup
Select backup file (0-1,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- Restoring backup data was completed.
Hit enter key. (Enter)
If you enter C in the CER command menu and press Enter, the following menu screen
appears.
(S,C,[Q]) : C
-- SSL private key and certificate menu --
S. Generate private key and self-signed certificate.
C. Generate private key and certificate signing request(CSR).
H. Show certificate Information.
I. Import certificate file.
P. Copy certificate file.
B. Backup.
R. Restore.
Q. Quit.
(S,C,H,I,P,B,R,[Q]) :
Select a menu item from the table below to set the switch module firmware information.
Menu
S. Generate private key and
self-signed certificate
C. Generate private key and
certificate signing request
(CSR)
H. Show certificate
Information
I. Import certificate file.
P. Copy certificate file.
(Enter)
(Enter)
Generates a pair of SSL keys and self-signed certificate.
Generates a CSR to request the signed server certificate
to a certificate authority.
Shows SSL certificate information.
Imports the signed server certificate.
Outputs the currently used server certificate to an area
where FTP is available.
611
Description