Restore The I/O Slot Expansion Unit Settings - Hitachi Compute Blade 2000 User Manual

4
When you type a file name string, a confirmation message is displayed and the
prompt is ready. Type Y and press Enter. A file with the setting is created. To
cancel the setting backup, type N and press Enter after the confirmation
message. When the file has been created, the file name is displayed and the
prompt is ready. Press Enter, and the screen returns to the menu.
Input backup file name ([Quit]):conf
Confirm? (Y,[N]) : Y
- Creating backup file was completed.
- Backup file name is io-conf.backup.
Hit enter key.
5 You can take the created file with FTP or SFTP, which is stored in the user
directory of the I/O slot expansion unit. The account name and password is the
same as those used in logging into the console.
Restore the I/O slot expansion unit
settings
1
Transfer the file with the settings to the I/O slot expansion unit with File Transfer
Protocol (FTP) or SSH File Transfer Protocol (SFTP). Log into FTP or SFTP
using the same account name and password as those used in logging into the
console Log into the Web console as Administrator.
2 Log in to the console as Administrator.
3 Type UBR at prompt, and press Enter.
Compute Blade 2000 I/O slot expansion unit I/O Module
ALL RIGHTS RESERVED,COPYRIGHT (C), 2010, HITACHI,LTD.
Chassis ID
Firmware Revision : A0100-Z-919
Use EX Command to logout.
Use HE Command to get a list of available commands.
5713RF0 00108(0)IOEU>UBR
<< UBR - Backup and restore setting. >>
-- Backup and restore setting menu --
B. Backup.
R. Restore.
Q. Quit.
(B,R,[Q]):
(Enter)
(Enter)
: 5713RF0 00108
(Enter)
877
(Enter)