System Requirements For Lpar Manager And Lpar - Hitachi Compute Blade 2000 User Manual

System requirements for LPAR manager
and LPAR
The following table shows the requirements for using LPAR manager/LPAR. Without
those requirements satisfied, LPAR manager and LPARs might not work correctly.
Resources to be assigned to LPARs depend on your purpose and environment.
Item
LPAR Memory
manager
LPAR Processor
Memory
*1: When memory is 256 MB, iup to 32 processors can be installed.
Figures in parentheses ( ) show the recommended value.
Setting LPAR manager system
Set a unique value to VNIC System number per LPAR manager including Compute Blade
1000, Compute Blade 2000, and Compute Blade 320. If a value overlaps with that of
another LPAR manager, network communication is not available on LPAR because the
MAC address of the virtual NIC to the LPAR overlaps.
Maximum resolution
The following table describes the maximum resolution when the remote desktop, remote
console, or NETM/Remote Control is used.
Maximum
Application
resolution
Remote
desktop
Remote 1024 x 768
console
NETM/Remote
Console
System requirements
1536 MB
2 processors or more
Windows Server 2003 R2: 256 MB (256 MB or greater)
Windows Server 2008: 512 MB (2048 MB or greater )
Windows Server 2008 R2: 512 MB (2048 MB or greater )
Windows Server 2012: 512 MB (2048 MB or greater)
Windows Server 2012 R2: 512 MB (2048 MB or greater)
Red Hat Enterprise Linux 5: 512 MB (1024 MB per logical processor)
Red Hat Enterprise Linux 6: 1024 MB (1024 MB per logical processor)
Prerequisite
- Up to the maximum resolution can be
specified: 1280 x 1024 for example.
It is recommended that the resolution of a
guest OS be 1024 x 768.
If a guest OS resolution is more than 1024 x
768, the console terminal displays the area
of 1024 x 768 out of the screen. But the
screen can be scrolled by moving the scroll
box.
1379
*1