Requirements For Lpar Manager Startup; Maximum Resolution - Hitachi Compute Blade 500 Series User Manual

In this case, change the transfer rate of the FC port to the same rate as
that of your fibre channel card using the "portcfgspee" command.

Requirements for LPAR manager Startup

Requirements for LPAR manager Startup are as below. LPAR manager cannot
startup when the requirements are not fulfilled. Arrange to assign the system
resources to LPAR according to your environment.
LPAR manager
LPAR

Maximum Resolution

The following table describes the maximum resolution when the remote
desktop, remote console, or NETM/Remote Control is used
Application
Remote desktop -
Remote console
NETM/Remote
Console
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 10-2 Requirement Items for LPAR manager System
Item
Memory
Processor
Memory
Table 10-3 Maximum Resolution
Maximum
resolution
1024 x 768
2048MB or more
1 (2 or more are recommended)
Windows Server 2008 : 512MB (2048MB or
more is recommended)
Windows Server 2008R2 : 512MB (2048MB or
more is recommended)
Windows Server 2012 : 512MB(2048MB or
more is recommended)
Windows Server 2012R2 : 512MB(2048MB or
more is recommended)
RedHat Enterprise Linux5 : 512MB (1024MB/
LPAR is recommended)
RedHat Enterprise Linux6 : 1024MB (1024MB/
LPAR is recommended)
Prerequisite
Up to the maximum resolution can be
specified: 1280 x 1024 for example.
It is recommended that the resolution of a guest OS
be 1024 x 768.
If a guest OS resolution is more than 1024 x 768,
the console terminal displays the area of 1024 x 768
out of the screen. But the screen can be scrolled by
moving the scroll box.
Notes
Requirements
10-3