Logical Partition Configuration - Hitachi Compute Blade 500 Series User Manual

Press [F4]: 'Deact' in this screen to display a sub-screen, place the cursor on
an LPAR to deactivate on the sub-screen, and press [Enter]. You can perform
"Deactivate" only to activated LPARs.
How to Reactivate an LPAR
Note:
• When an LPAR is reactivated, the power source of the LPAR is rebooted
and the guest OS on the LPAR is also rebooted forcibly. Particularly, when
an LPAR is reactivated while the guest OS operating on the LPAR is
loading or saving data in a disk, the disk might be broken down. So,
reboot an LPAR by the operation on a guest OS on the LPAR instead of
the reactivating operation on the LPAR manager screen.
• When a guest OS operating on an LPAR is rebooted by the operation on
the guest OS, the guest OS might be hang up in the final process. In such
a case, reactivate the LPAR. (Then, the connection between an LPAR and
a disk is disconnected. So, the disk is not broken down.)
Press [F5]: React in this screen to display a sub-screen, place the cursor on
an LPAR to reactivate on the sub-screen, and press [Enter]. You can perform
"Reactivate" only to activated LPARs.
How to Add an LPAR
Press [F6]: Add in this screen to display a sub-screen, place the cursor on an
LPAR to add on the sub-screen, and press [Enter].
How to Delete an LPAR
Press [F7]: Remove in this screen to display a sub-screen, place the cursor
on an LPAR to delete on the sub-screen, and press [Enter]. You can delete
only a deactivated LPAR. When an LPAR is deleted, all resources assigned to
the LPAR will be unassigned.
How to change from the LPAR manager screen to an LPAR screen
Press [F8]: LPAR Screen in this screen to display a sub-screen, places the
cursor on an LPAR which you change on the sub-screen, and press [Enter].
You can select only an activated LPAR to change to the screen.
How to Save configuration
Press [F9]: Save Configuration in this screen.

Logical Partition Configuration

Use the [Logical Partition Configuration] screen to do the followings. Example
of Logical Partition Configuration screen is below.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Operation by LPAR manager Screen
7-9