Hitachi Compute Blade 500 Series User Manual page 255

Figure 7-21 VLAN ID Configuration Screen
How to change the inter-LPAR packet filtering
Note:
• When VF NIC is assigned, you can select only [Disable].
• Place the cursor at an item where an LPAR line crosses a VNIC number
column, and press [F8]: Packet Filter to display the sub-screen. Select an
inter-LPAR packet filtering to change, and press the [Enter] key.
Table 7-21 Details of Inter-Packet Filtering
Inter-LPAR packets
Inter-LPAR
Inside
packet
LPAR
filtering
manager
Disable Transmit
Enable Not
Transmit
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Packets to
Outside
outside LPAR
LPAR
manager
manager
Not Transmit
Transmit
Transmit Transmit
Purpose
Permits inter-LPAR
communication in the same
segment.
Used for inter-LPAR
communication only inside
LPAR manager.
Disables inter-LPAR
communication in the same
segment.
Used for improving
independence and security of
LPARs when each LPAR has a
respective owner.
7-51