Hitachi Compute Blade 500 Series User Manual page 249

Item
VNIC MAC Address
Information
Tag
(VF NIC)
Prm
VLANID
Inter-LPAR
Packet
Filtering
TXRATE
Legend:
Y: can be changed
N: cannot be changed
How to Change Logical NIC assignment
Note:
• You can assign a number of VF NIC over maximum per physical port on
screen settings. However, the total number of VF NIC on activated LPAR
can be assigned up to the maximum number per physical port.
• If the total number of VF NIC on activated LPAR is assigned over the
maximum number per physical port, "The VF is already assigned the
maximum assignable times to LPARs." is displayed while activating LPAR,
and then activation fails.
Deactivate the LPAR to change the Logical NIC assignment. Place the cursor
on the crossing item of the LPAR in line and the virtual NIC number in the
column, and press [Enter] to display the sub-screen for selecting the
assignment. Place the network segment of the Logical NIC you want to
change, and then press [Enter].
How to show the list of VLAN ID assignment and Promiscuous Mode
settings
Press [F2]: Disp to show the list of VLAN ID assignment and Promiscuous
Mode settings defined in the network segment identifier where the cursor is
placed on this screen.
If placing on the area without the network segment identifier defined, nothing
is displayed by pressing [F2]: Disp.
To close the list, press [Esc]. To display the list of VLAN ID assignment and
Promiscuous Mode settings defined in the different network segment identifier
from the list displayed with [F2]: Disp., press [Esc] to close the current
display, move the cursor, and press [F2]: Disp again.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LPAR Status
Activate Deactivate
N Y
N Y
Y Y
N Y
Y Y
Y Y
Operation by LPAR manager Screen
Remark
Failure
N -
N -
N -
N -
N -
N -
Supported
LPAR
manager
Version
01-9X~
01-9X~
01-9X~
01-9X~
01-9X~
01-9X~
7-45